Инд. авторы:	Sakai T., Takahashi S., Nishitani N., Mashino I., Ohtani E., Hirao N.
Заглавие:	Equation of state of pure iron and Fe0.9Ni0.1 alloy up to 3Mbar
Библ. ссылка:	Sakai T., Takahashi S., Nishitani N., Mashino I., Ohtani E., Hirao N. Equation of state of pure iron and Fe0.9Ni0.1 alloy up to 3Mbar // Physics of the Earth and Planetary Interiors. - 2014. - Vol.228. - P.114-126. - ISSN 0031-9201. - EISSN 1872-7395.
Внешние системы:	DOI: 10.1016/j.pepi.2013.12.010; SCOPUS: 2-s2.0-84897067559; WoS: 000337014100013;
Реферат:	eng: Pure iron and Fe0.9Ni0.1 alloy were compressed to a pressure of 279GPa and 272GPa, respectively. The compression data sets were fitted using the third order Birch-Murnaghan equation of state based on six different pressure scales. Our result shows the nickel increase the density and the c/a ratio, decrease the bulk modulus. The high temperature data obtained the thermal equation of state parameters. At high temperature, although the nickel effect on density slightly decrease due to the a little larger thermal expansion, the bulk modulus difference increase to 7.3-7.8% at 329GPa and 5000K. Nickel effects on elasticity might be important at multimegabar pressure and especially high temperature such as the inner core condition. The core density deficit was estimated to be 3.5(1)-5.3(1)% for pure iron and 4.7(1)-6.5(2)% for Fe0.9Ni0.1 alloy if the temperature at the inner core boundary is 5000K. © 2014 Elsevier B.V.
Ключевые слова:	Density; Equation of state; Fe-Ni alloy; The inner core; Alloys; Density (specific gravity); thermal expansion; nickel; iron; high temperature; equation of state; concentration (composition); bulk modulus; alloy; Iron alloys; Thermal equation of state; Multimegabar pressures; Inner core; FeNi alloys; Equation of state; Different pressures; Core density deficits; Birch-Murnaghan equation of state; Thermal expansion; Nickel; Iron; Equations of state of solids; Elasticity; Elastic moduli; Bulk modulus;
Издано:	2014
Физ. характеристика:	с.114-126